2.4GHz RF Transceiver CC2500 Module with..

Product description

2.4GHz RF Transceiver CC2500 Module with Antenna
[CC2500]

USD18.45

This wireless module board using high-performance TI-Chipcon's CC2500 radio chip, the maximum transmission data rates up to 500Kbps, and can modify the software Porter rates, open to transmission distance of 300 meters, with a wireless wake-up features such as sensitivity to-110dBm, high reliability, can be widely used in various occasions, short-range wireless communications (such as wireless meter reading, industrial remote control, low-power handheld equipment, etc.)

Operating voltage: 1.8V ~ 3.6V, recommend close to 3.6V, but not more than 3.6V (recommended 3.3V)
Work on the 2400-2483.5MHz ISM band and SRD
The maximum operating rate of 500kbps, support for 2-FSK, GFSK and MSK modulation
High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
The built-in hardware-to-multipoint communication CRC error detection, and address control
A lower current consumption
Programmable control of output power, for all the support frequencies of up to 0 dBm
RTC wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment
Support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System
Fast frequency changes brought about by a suitable synthesizer frequency hopping systems
module can be software-based address, software programming is very convenient
Standard DIP spacing (2.54mm) interfaces for embedded applications
Separate 64-byte RX and TX data FIFO
Transmission Distance: open to the actual transmission distance 250-300 meters (depending on the specific situation of the environment and communication baud rate settings, etc. may be)
Module Size: 30mm * 22mm (the size of non-SMA head and antenna
Include the antenna

2.4GHz CC2500 RF Module x 1
2.4GHz Antenna x 1

Click on image to enlarge