|
This
wireless module board using high-performance TI-Chipcon's
CC1101 radio chip, the maximum transmission data rates up to
500Kbps, and can modify the software Porter rates, open to
transmission distance of 300 meters, with a wireless wake-up
features such as sensitivity to-110dBm, high reliability, can be
widely used in various occasions, short-range wireless
communications (such as wireless meter reading, industrial
remote control, low-power handheld equipment, etc.)
|
|
 |
- Operating voltage: 1.8V ~ 3.6V, recommend close to 3.6V, but not
more than 3.6V (recommended 3.3V)
- Work on the 433MHz band
- The maximum operating rate of 500kbps, support for 2-FSK, GFSK and
MSK modulation
- High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
- The built-in hardware-to-multipoint communication CRC error
detection, and address control
- A lower current consumption (RX in, 15.6mA, 2.4Kbps, 433MHz)
- Programmable control of output power, for all the support
frequencies of up to +10 dBm
- Wireless wake-up functionality to support low-power electromagnetic
activation, wireless wake-up low-power sleep state of the equipment
Support the transmission channel before the auto-clean-up visits (CCA),
the Carrier Sense System
- Fast frequency changes brought about by a suitable synthesizer
frequency hopping systems
- Module can be software-based address, software programming is very
convenient
- Standard DIP spacing interfaces for embedded applications
- Separate 64-byte RX and TX data FIFO
- Transmission Distance: open to the actual transmission distance
250-300 meters (depending on the specific situation of the environment
and communication baud rate settings, etc. may be)
- Module Size: 29mm * 16mm * 1mm (the size of non-SMA head and
antenna)
- Include the antenna
|
 |
- 433MHz CC1101 RF Module x 1
- 433MHz Antenna x 1
|
|
Click on image to enlarge |
|
