This wireless module  board  using high-performance TI-Chipcon's CC1101 radio chip,  the maximum transmission data rates up to 500Kbps, and can modify the software Porter rates, open to transmission distance of 300 meters, with a wireless wake-up features such as sensitivity to-110dBm, high reliability, can be widely used in various occasions, short-range wireless communications (such as wireless meter reading, industrial remote control, low-power handheld equipment, etc.)
 
 
  • Operating voltage: 1.8V ~ 3.6V, recommend close to 3.6V, but not more than 3.6V (recommended 3.3V)
  • Work on the 433MHz band
  • The maximum operating rate of 500kbps, support for 2-FSK, GFSK and MSK modulation
  • High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
  • The built-in hardware-to-multipoint communication CRC error detection, and address control
  • A lower current consumption (RX in, 15.6mA, 2.4Kbps, 433MHz)
  • Programmable control of output power, for all the support frequencies of up to +10 dBm
  • Wireless wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment
    Support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System
  • Fast frequency changes brought about by a suitable synthesizer frequency hopping systems
  • Module can be software-based address, software programming is very convenient
  • Standard DIP spacing interfaces for embedded applications
  • Separate 64-byte RX and TX data FIFO
  • Transmission Distance: open to the actual transmission distance 250-300 meters (depending on the specific situation of the environment and communication baud rate settings, etc. may be)
  • Module Size: 29mm * 16mm * 1mm (the size of non-SMA head and antenna)
  • Include the antenna

 

Packet Content

433MHz CC1101 RF Moudle x 1

433MHz Antenna x 1

 

433MHz RF Transceiver CC1101 Module with Antenna

  • Product Code: CC1101_433
  • Availability: In Stock
  • $18.45